The 2017 Everlast MIG140 MIG welder is absolutely great for those that use wire electrode and not stick. It’s one that comes with all the components that would aid anyone in having the best use of it.
There are ports on it with rheostat functions which one can dial for the operation of the unit. Aside from that, the product is lightweight and can easily be lugged from one place to another with ease.
Furthermore, unlike some products that have some of their components are made of plastics, however, this unit is made of metals absolutely except the handle at the top.
As a matter of fact, it has an ergonomic structure and you can depend on it for a long period of time. This is one that several customers have attested to its efficiency.
It’s definitely one that one can trust for maximal output and versatility. Nevertheless, check out the features below.
2017 Everlast mig140 MIG Review | 5 Major Features
1. Wire speed and voltage regulator
The performance of the wire feed system is crucial to the stability and reproducibility of MIG welding.
This product comes with a feature which permits the regulation of both the wire speed and the voltage depending on the preference of the user or even the material been used.
This feature allows controlled welding and the final outcome of the entire process. However, this is solely determined by the technical know-how of the welder.
Adjusting the wire speed and voltage also ensures that no damage is done to the project as some materials may not be able to withstand a voltage that has been previously set.
2. The Power Source
The Everlast140MIG welder has an input design of 120v and usable with circuits of 140Amp. In MIG, current is determined by wire feed speed and arc length is determined by power source voltage level.
Hence, unlike conventional MIG welders, the input design of the power source is suitable for welding various categories of metals in terms of tensile strength. This gives a better output and a more desirable result within the shortest possible time.
3. Inverter-based design
This feature lowers the weight alongside lower power consumption while increasing the duty cycle and arc performance.
The MIG welder comes with a 25% duty cycle at a maximum of 140Amps of power. The dimension of this product is 17 x 8 x 14 inches and it weighs 25 pounds.
Although you might need to purchase another roller, yet this comes with a smooth roller that one can flawlessly use with flux-core arc welding.
The smooth roller is compatible with wires within the range of 0.025-0.035. Furthermore, there are vents at the front and sides of the unit.
Not only that, you’d equally find a handle at the top. It has all the prospects that you hanker for to enjoying your time while working.
The cord that comes with the spool gun of this unit is 10 feet long and it’s designed to be used with spools of 4” and 8”.
And it also comes with a ground clamp which is 5ft 6inch long. What you’d also find are the regulators including gauges.
As a matter of fact, this can use gases and no gas depending on the preference of the user. In a nutshell, you don’t need to purchase anything else with the purchase of this product.
This is a lightweight unit that anyone can use. You can use it without it getting heated up. It’s just a unit that can equally be used just like any other modern unit. In other words, you can use it in houses and industries.
Why Should You Use Everlast140 MIG welder?
1. Efficient design
This product possesses an inverter based design which makes it more efficient than a transformer based MIG welder.
Its design has a lower weight and also consumption of less power thereby increasing its duty cycle i.e the time or period in which it stays active. This is gauged at 25% at maximum of 140amps of power.
2. Step-less control of wire speed and voltage
Control of the wire speed and voltage can be done in a quite easy manner. This is put into consideration because one may be handling metals of varying thickness hence you do not want to burn a hole into your project.
This is an important criterion that must be considered when purchasing modern day gadgets. The Everlast140E MIG welder has a lightweight which enables easy carriage from one location to another. It also offers a smaller footprint without reducing the maximum diameter wire roll.
Due to its 120v input design, the equipment is suitable for use anywhere. It consumes little power but still providing effective results.
It also has the ability to weld a variety of materials which could range from thin gauge or sheet metal to heavy steel pipe.
5. Customers’ Reviews
Previous users of this product have found it very helpful and efficient. It requires little or no expertise to be used.
Recommendations have also been offered in terms of its built quality, overall fit and the excellent finish the equipment provides.
- Easy control of wire speed and voltage
- Highly efficient inverter technology
- Great penetration power of the gun
- Very affordable
- Impressive built quality and overall fit
- Portability due to lightweight
- Highly efficient euro connectors which cannot be easily removed
- Capable of 1/4 inch welding
- Has a post flow feature and fan continues to run after turning the machine off till it cools down
- Better duty cycle when compared to transformer based MIG welders.
The Negative Things
- Lack of quick start guide for an entry level welder
- Ground clamp isn’t good enough
Frequently Asked Questions
- What type of control of wire speed and voltage exists?
ANS: It has easy and step-less control of wire speed and voltage with no tapped settings. It has clock-work type settings which are easy to operate and understand.
- Can I do production work with this welder?
ANS: 140Amps can do a lot. However, it has a 25% duty cycle and that means you have to give it a rest so often.
- Why is it so light?
ANS: Transistor technology provides power over the transformer’s bulk and weight.
- Do you need to buy gas to be able to weld with this?
ANS: Yes, if you need to use the MIG function.
- What is the thickest metal that should be welded when using this welder?
ANS: Thickness is not the issue as thicker metal means using bevels and multiple passes. Keep in mind the duty cycle though.
Projects carried out in the right environment and most importantly with the right equipment will without an iota of doubt be the cynosure of all eyes. With equipment such as this, possessing the desirable feature of an ideal welder, the art of welding becomes easy and enjoyable.
Obvious and impressive results are gotten in no time with flexibility to the outcome depending on the choice of the welder. The Everlast 140E MIG welder has put in place all the required facility to ensure an overall fit to your project hence an indispensable gadget you can’t afford not owning.